• Personal Digital Cronometer with laser sensor and extremely stable quarze tim base.
• Indication of time with resolution of 1/1000 of a second and speed given in km/h.
• 100 memory positions.
• Over 8 hours of working time with each recharge even in cold temperatures.
• Display with excellent reading up to –20°c.
• Universal charger 110-220 volt operation.

PRESENTATION

Crono Test is a programmable chronometer with microprocessor, ideal for testing the glide of skis and ski waxes.

GETTING STARTED

Position the two refelctors on a slight downhill at a distance between 20-80 cm. from the track. Fix Crono Test to your leg, and turn “on”. The sequence movement for testing is completely automatic; when running through the first reflector (start) the chronometer will start counting, and at the second reflector (stop) the display will indicate the time in seconds and thousands of seconds. If you have programmed the chronometer inserting the information regarding the distance in meters between the two reflectors, the display will visualize in time and also in km/h. At the next run,the location and new measurement will automatically proceed. It is possible , however, at any time to move from the location memory to review data or to re-write over an incorrect measurement.s1

PROGRAMMING

Crono Test offers a menu for programming the distance between the two riflectors in order to calculate the speed and for cancelling data contained in the memory.
Press together M-/M+ and you will enter into the program phase. The key On/Off will permit you to scan the menu.
CLEAR M+ = YES
Press the key M+ and all data memorized will be cancelled.
DISTANCE: permits you to program the distance in meters between the two reflectors using the keys M-/M+. In this case Crono Test calculates the speed in Km/h.
If you select M=0, the speed will not appear on the display.
EXIT M+ = YES
Press the key M+ and you to escape from the programming menu; the escape is automatic if there is no other operation indications given within 10 seconds.

EDIT OR OVER-WRITE DATA

All data can be edited or over-written while testing. That is the case when a run must be repeated without increasing the memory location. It is sufficient to press once M- .

BATTERY CHARGER

Crono Test is supplied with a re-chargeable battery which guarantees 8 hours of working time. A normal re- charge will take about 10-12 hours. CHARGING indicated on the display assures correct connection to supplies. To charge the battery use exclusively the charger furnished with your Crono Test. The tension required is from 110 to 230 Volt. Always check and assure that the plug matches the wall socket.

GUARANTEE

Crono Test supplied with two reflectors, battery charger, and carry case is guaranteed for 24 months. STAR SKI WAX will substitute any defective parts; the guarantee is to be considered not valid if the instrument or its parts have been tampered or for negligence.