1) After finishing the glide zone, carefully sand the grip zone with sand paper 200.

2) Select and apply a thin layer of kick wax evenly.

3) Polish in with cork. Repeat phase 2 and 3 in even layers until desired thickness.

The racing kick zone varies according to the type of skis and the experience of the skier; therefore the indications below are an average value.

1) Apply the klister to the grip zone on both sides of the groove, in a fish bone pattern. In very cold conditions, the tube can be heated so as to facilitate the application.

2) Spread the klister with the palm of your hand or with a cork to create an even layer.

For professional use, klisters can be mixed together. One layer is normally enough.